A meter that fits the pipe is not automatically the right meter for the demand. Sizing should connect the expected consumption pattern with the specified measuring range and the hydraulic conditions available at the site.
Build a demand profile
Collect normal, minimum and peak flow information. Account for storage tanks, intermittent supply and equipment that draws water in short bursts. Where measurements are unavailable, document the basis of the estimate and its uncertainty. Average monthly consumption alone cannot describe the short-term peaks or small night flows the meter will experience.
For a WE RICH product comparison, the LXC DN15–DN50 ultrasonic water meter with valve control combines ultrasonic measurement with remote valve control for residential supply points.
For a WE RICH product comparison, the LXC-D DN50–DN300 ultrasonic bulk water meter addresses larger-diameter water measurement at network and bulk supply points.
For a WE RICH product comparison, the LXG electromagnetic water meter offers an electromagnetic measurement option to compare against the project’s fluid and installation requirements.
Compare range and hydraulic impact
Use Q1 and Q3 together with the applicable overload conditions. Review pressure loss at relevant operating points and the pressure available to the customer. Oversizing can weaken low-flow coverage; undersizing may place sustained demand outside the intended envelope. Connection size, permanent flow and pressure rating are separate properties and should appear separately in the selection sheet.
Check the installed solution
Confirm space for fittings, isolation and service access. Review mounting orientation and the need for straight pipe or flow conditioning. For remote reading, include enclosure and coverage conditions. A defensible sizing decision records the chosen model, operating assumptions and reasons for rejecting alternatives. Revisit those assumptions when the building use or demand changes.
Practical checklist
- Record demand assumptions.
- Review Q1, Q3 and pressure loss together.
- Reassess after major demand changes.
Frequently asked questions
Should meter size equal pipe size?
Not necessarily. Hydraulic and metrological assessment determines the suitable arrangement.
Is average consumption enough?
No. Include low flows, sustained demand and short peaks.
Can a larger meter improve every application?
No. It can change pressure loss and low-flow coverage in different ways.
Related articles
References and technical reading
Product capabilities depend on the model and its documentation. Confirm installation and performance requirements for the project.