Ultrasonic and electromagnetic meters both support electronic flow measurement without rotating measuring elements. Their physical principles differ, so the best choice depends on the liquid, the installation and the project’s measurement objective.

Start with the liquid

Transit-time ultrasonic measurement relies on an acoustic path. Electromagnetic measurement requires an electrically conductive liquid. Air, deposits and process conditions can influence suitability in different ways. Ask suppliers to evaluate the actual water quality instead of comparing generic technology labels. A model designed for drinking water should not be assumed suitable for every wastewater or industrial process.

For a WE RICH product comparison, the LXC-D DN50–DN300 ultrasonic bulk water meter addresses larger-diameter water measurement at network and bulk supply points.

For a WE RICH product comparison, the LXG electromagnetic water meter offers an electromagnetic measurement option to compare against the project’s fluid and installation requirements.

Compare the installed configuration

Both technologies have model-specific requirements for orientation and hydraulic conditions. Electromagnetic meters also need suitable electrical referencing; ultrasonic designs need an appropriate acoustic measurement arrangement. Compare flange or thread dimensions, access for service, pressure loss and power supply. Do not transfer a straight-length claim from one product family to another.

Choose using a common acceptance plan

Specify the same flow points, installation envelope and reporting requirements for both options. Compare results under representative conditions, not only catalogue maximums. Evaluate how alarms, totals and missing data appear in the receiving system. Life-cycle comparison should include service work and communication costs, with product-specific evidence for battery and durability assumptions.

Practical checklist

  • Describe water quality and process limits.
  • Use identical pilot acceptance criteria.
  • Compare complete installed costs.

Frequently asked questions

Which technology is universally better?

Neither. Suitability depends on the defined service and verified model performance.

Can both support remote reading?

Compatible models can, but the interface and integration must be specified.

Should both be tested at low flow?

Yes, when low-flow measurement is relevant to the project acceptance criteria.

Related articles

References and technical reading

Product capabilities depend on the model and its documentation. Confirm installation and performance requirements for the project.

Explore the products for this application

Confirm the selected model’s approved flow range, installation conditions and available communications before specifying it. These options support product evaluation; they do not replace site testing.